Mercurial > gemma
graph
-
hydrological conditions: factor out setting of dimensionsTue, 09 Jul 2019 17:12:58 +0200, by Thomas Junk
-
client: configuration: make color settings resettableTue, 09 Jul 2019 17:00:33 +0200, by Markus Kottlaender
-
client: configuration: added defaults fileTue, 09 Jul 2019 16:52:19 +0200, by Markus Kottlaender
-
hydrological conditions: factor out side-effects from diagram renderingTue, 09 Jul 2019 16:50:36 +0200, by Thomas Junk
-
client: configuration: reset map layer config to defaultTue, 09 Jul 2019 16:26:54 +0200, by Markus Kottlaender
-
client: configuration: moved default values to separate fileTue, 09 Jul 2019 16:11:42 +0200, by Markus Kottlaender
-
mergeTue, 09 Jul 2019 15:42:31 +0200, by Thomas Junk
-
hydrolgical condition: remove old diagramTue, 09 Jul 2019 15:42:12 +0200, by Thomas Junk
-
client: configuration: reset data accuracy to defaultsTue, 09 Jul 2019 15:41:31 +0200, by Markus Kottlaender
-
mergeTue, 09 Jul 2019 15:37:59 +0200, by Thomas Junk
-
Backed out changeset 55e503270f38Tue, 09 Jul 2019 15:37:42 +0200, by Thomas Junk
-
client: configuration: reset morphology classbreaksTue, 09 Jul 2019 15:29:56 +0200, by Markus Kottlaender
-
client: configuration: save sounding result classbreaks and comparison classbreaks separatelyTue, 09 Jul 2019 15:07:54 +0200, by Markus Kottlaender
-
client: configuration: replaced icon to close colorpicker for classbreaksTue, 09 Jul 2019 14:56:54 +0200, by Markus Kottlaender
-
move code vor svg2pdf in mixinTue, 09 Jul 2019 14:42:26 +0200, by Thomas Junk
-
Hydrological conditions: render svg in offscreen elementTue, 09 Jul 2019 14:35:01 +0200, by Thomas Junk
-
client: configuration: added tint icon to classbreak color selectionTue, 09 Jul 2019 14:22:01 +0200, by Markus Kottlaender
-
client: configuration: classbreaks: fixed databinding issue and added possibility to add classbreaks at any positionTue, 09 Jul 2019 13:31:13 +0200, by Markus Kottlaender
-
Validate the config values of the morpho classes when saving. Also don't trigger the expensive re-calculation of the contour lines if only the colors changed.Tue, 09 Jul 2019 11:31:49 +0200, by Sascha L. Teichmann
-
client: pdf-gen: adjust diagramlegend size (waterlevel diagram)Tue, 09 Jul 2019 08:55:00 +0200, by Fadi Abbud
-
client: refresh map layer sources whenever map component is mountedMon, 08 Jul 2019 17:43:48 +0200, by Markus Kottlaender
-
client: layer refresh button refreshes now all layers, not just vector layersMon, 08 Jul 2019 17:26:03 +0200, by Markus Kottlaender
-
client: reload config right after saving it to make sure everything is updatedMon, 08 Jul 2019 17:24:50 +0200, by Markus Kottlaender
-
hydrological_conditions: testwise work with fixed pixelratio for PDF-ExportMon, 08 Jul 2019 17:07:38 +0200, by Thomas Junk
-
MergedMon, 08 Jul 2019 17:00:54 +0200, by Sascha Wilde
-
gm import: Ignore (and warn for) water levels of -99999.Mon, 08 Jul 2019 10:54:51 +0200, by Sascha Wilde
-
added classbreak color for morphology classbreaksMon, 08 Jul 2019 16:28:44 +0200, by Markus Kottlaender
-
Merged sld-colors branch back into default branch.Mon, 08 Jul 2019 16:04:02 +0200, by Sascha L. Teichmann
-
Merged default into sld-colors branch. sld-colorsMon, 08 Jul 2019 16:03:18 +0200, by Sascha L. Teichmann
-
client: made triangles in data accuracy layer equilateralMon, 08 Jul 2019 15:45:42 +0200, by Markus Kottlaender
-
client:pdf-gen: fix drawing of axises on pdf (hydrologicalconditions diagram)Mon, 08 Jul 2019 15:39:39 +0200, by Fadi Abbud
-
Merged default into sld-colors branch. sld-colorsMon, 08 Jul 2019 14:34:42 +0200, by Sascha L. Teichmann
-
pdf_tool: retain default template, when custom template is uploadedMon, 08 Jul 2019 14:11:19 +0200, by Thomas Junk
-
import_schedule: lintingMon, 08 Jul 2019 12:34:10 +0200, by Thomas Junk
-
Merged default into sld-colors branch. sld-colorsFri, 05 Jul 2019 15:15:59 +0200, by Sascha L. Teichmann
-
Merged default into sld-color branch. sld-colorsFri, 05 Jul 2019 12:26:49 +0200, by Sascha L. Teichmann
-
First preparation to use custom classbreaks in contour generation. sld-colorsFri, 05 Jul 2019 11:29:10 +0200, by Sascha L. Teichmann
-
Merged default into sld-colors branch. sld-colorsFri, 05 Jul 2019 10:31:23 +0200, by Sascha L. Teichmann
-
Only trigger the reconfiguation functions if the values have changed. sld-colorsThu, 04 Jul 2019 18:05:08 +0200, by Sascha L. Teichmann
-
Trigger reconfiguration of GeoServer if the system settings were written. sld-colorsThu, 04 Jul 2019 17:44:39 +0200, by Sascha L. Teichmann
-
Adjusted unit test for SLD templating. sld-colorsThu, 04 Jul 2019 17:18:05 +0200, by Sascha L. Teichmann
-
Prepared class break templating mechanism to work with differences, too. Needs an adjusted template. sld-colorsThu, 04 Jul 2019 11:26:11 +0200, by Sascha L. Teichmann
-
Merged default into sld-colors branch. sld-colorsThu, 04 Jul 2019 10:37:42 +0200, by Sascha L. Teichmann
-
Cleanup templating of styles [WIP]. sld-colorsWed, 03 Jul 2019 18:26:41 +0200, by Sascha L. Teichmann
-
Added templating and a failing test. sld-colorsWed, 03 Jul 2019 17:47:17 +0200, by Sascha L. Teichmann
-
fetch data for sld template from data base and interpolate colors (WIP) sld-colorsWed, 26 Jun 2019 17:42:51 +0200, by Markus Kottlaender
-
merge with yworks-svg2pdfFri, 05 Jul 2019 14:00:23 +0200, by Thomas Junk
-
client: Added tooltips for import retry feature in en_GB and de_AT.Fri, 05 Jul 2019 13:50:34 +0200, by Raimund Renkert
-
Move hydrological conditions to svg2pdf yworks-svg2pdfFri, 05 Jul 2019 13:16:53 +0200, by Thomas Junk
-
Fairwayprofile with svg2pdf call and as lookup yworks-svg2pdfFri, 05 Jul 2019 12:54:27 +0200, by Thomas Junk
-
fix bottleneckselection: use id as identifier yworks-svg2pdfFri, 05 Jul 2019 12:39:19 +0200, by Thomas Junk
-
Added range info to BN import log.Fri, 05 Jul 2019 11:34:51 +0200, by Sascha Wilde
-
client: improve pdf generation towards vector diagrams yworks-svg2pdfFri, 05 Jul 2019 11:13:53 +0200, by Bernhard Reiter
-
use only our production build of svg2pdf yworks-svg2pdfFri, 05 Jul 2019 11:03:35 +0200, by Thomas Junk
-
client: improve pdf generation towards vector diagrams yworks-svg2pdfFri, 05 Jul 2019 10:50:55 +0200, by Bernhard Reiter
-
dogfooding our productionbuild of jspdf and svg2pdf yworks-svg2pdfFri, 05 Jul 2019 10:31:53 +0200, by Thomas Junk
-
dogfooding our build of jspdf and svg2pdf yworks-svg2pdfFri, 05 Jul 2019 09:56:42 +0200, by Thomas Junk
-
package.json make yWorks-jsPDF dependecy transparent in package.json yworks-svg2pdfThu, 04 Jul 2019 14:27:08 +0200, by Thomas Junk
-
Available-fairway-depth(both): use mixin for template loading and image processing yworks-svg2pdfThu, 04 Jul 2019 11:43:06 +0200, by Thomas Junk
-
x-cuts_diagram: use mixin for template loading and image processing yworks-svg2pdfThu, 04 Jul 2019 11:25:25 +0200, by Thomas Junk
-
waterlevel_diagram: use mixin for template loading and image processing yworks-svg2pdfThu, 04 Jul 2019 11:21:59 +0200, by Thomas Junk
-
hydrological_conditions: use mixin for template loading and image processing yworks-svg2pdfThu, 04 Jul 2019 11:15:05 +0200, by Thomas Junk
-
Move Template loading and Imageprocessing to mixin yworks-svg2pdfThu, 04 Jul 2019 10:57:43 +0200, by Thomas Junk
-
client: improve pdf generation to use linbiolinum font yworks-svg2pdfThu, 04 Jul 2019 10:50:19 +0200, by Bernhard Reiter
-
client: improve waterlevel diagram pdf yworks-svg2pdfWed, 03 Jul 2019 17:48:19 +0200, by Bernhard Reiter
-
client: remove `export SVG` button for waterlevel yworks-svg2pdfWed, 03 Jul 2019 17:19:28 +0200, by Bernhard Reiter
-
client: update attribution infos on lib/mixins.js yworks-svg2pdfWed, 03 Jul 2019 17:13:41 +0200, by Bernhard Reiter
-
client: improve pdf generation getTextHeight() yworks-svg2pdfWed, 03 Jul 2019 16:53:06 +0200, by Bernhard Reiter
-
Hydrological_Conditions: prefetch images of template and convert to dataURI yworks-svg2pdfWed, 03 Jul 2019 16:50:28 +0200, by Thomas Junk
-
Waterlevel: prefetch images of template and convert to dataURI yworks-svg2pdfWed, 03 Jul 2019 16:42:38 +0200, by Thomas Junk
-
PDFTool: prefetch images of template and convert to dataURI yworks-svg2pdfWed, 03 Jul 2019 16:23:22 +0200, by Thomas Junk
-
client: improve pdf generation of Fairwayprofile yworks-svg2pdfWed, 03 Jul 2019 13:12:32 +0200, by Bernhard Reiter
-
Fairwayprofile: dashed patterns in PDF yworks-svg2pdfWed, 03 Jul 2019 12:38:13 +0200, by Thomas Junk
-
PDF: Fairwayprofile use setLineDashPattern yworks-svg2pdfWed, 03 Jul 2019 09:47:59 +0200, by Thomas Junk
-
PDFTool: use standard proportion instead of unnecessary getter function yworks-svg2pdfMon, 01 Jul 2019 17:23:07 +0200, by Thomas Junk
-
include svg2pdf. substitute upstream jsdpf with yworks-fork yworks-svg2pdfMon, 01 Jul 2019 16:14:18 +0200, by Thomas Junk
-
Added extra information to search results (wwname, ISRS code)Thu, 04 Jul 2019 17:21:21 +0200, by Sascha Wilde
-
Add wwname to import of virtual distance marks.Thu, 04 Jul 2019 16:30:19 +0200, by Sascha Wilde
-
client: Improved import retry ui.Thu, 04 Jul 2019 16:16:44 +0200, by Raimund Renkert
-
Add 'cc' parameter to search imports for a comma separated list of country codes for the the importing person.Tue, 02 Jul 2019 16:44:04 +0200, by Sascha L. Teichmann
-
Fixed simplification a bit.Tue, 02 Jul 2019 11:43:12 +0200, by Sascha L. Teichmann
-
Merged simplify-sounding-results into default.Mon, 01 Jul 2019 11:10:47 +0200, by Sascha L. Teichmann
-
Merged default into simplify-sounding-results branch. simplify-sounding-resultsMon, 01 Jul 2019 11:08:57 +0200, by Sascha L. Teichmann
-
Moved simplification algorithm to octree package. simplify-sounding-resultsMon, 01 Jul 2019 11:08:19 +0200, by Sascha L. Teichmann
-
Partition recursively. Does not produce good triangles. simplify-sounding-resultsWed, 26 Jun 2019 12:06:28 +0200, by Sascha L. Teichmann
-
Calculate distance from planes. simplify-sounding-resultsTue, 25 Jun 2019 21:04:16 +0200, by Sascha L. Teichmann
-
Initial partitioning of the input data. simplify-sounding-resultsTue, 25 Jun 2019 18:28:34 +0200, by Sascha L. Teichmann
-
Simple test driver for point simplification. Reads from STDIN, writes to STDOUT. simplify-sounding-resultsTue, 25 Jun 2019 17:44:20 +0200, by Sascha L. Teichmann
-
review_agm: fixed open diff bug. Only selected diff is opened and stays openThu, 27 Jun 2019 16:27:48 +0200, by Thomas Junk
-
agm_review: now with virtual scrollingThu, 27 Jun 2019 15:11:02 +0200, by Thomas Junk
-
Added tag v3.1-preview20190626 for changeset ad93adaeb688Wed, 26 Jun 2019 18:26:58 +0200, by Sascha Wilde
-
Section/Stretch avail: Fixed classification interval calculation. v3.1-preview20190626Wed, 26 Jun 2019 17:19:30 +0200, by Sascha L. Teichmann
-
client: configuration: morphology classbreaks: added color selectionWed, 26 Jun 2019 14:17:18 +0200, by Markus Kottlaender
-
Don't show unnecessary warnings when uploading TXT file for SR.Wed, 26 Jun 2019 11:00:35 +0200, by Sascha Wilde
-
import_configuration: retries and wait parameter added for trigger functionTue, 25 Jun 2019 17:05:57 +0200, by Thomas Junk
-
client: search: set item from sidebar for sections/stretchesTue, 25 Jun 2019 13:44:10 +0200, by Markus Kottlaender
-
usermanagement: max-height for dialogTue, 25 Jun 2019 13:03:34 +0200, by Thomas Junk
-
merging with branch infiniscrollTue, 25 Jun 2019 12:08:37 +0200, by Thomas Junk
-
search: include id in search result to mark sections/stretches as selectedTue, 25 Jun 2019 10:27:09 +0200, by Markus Kottlaender
-
SR import: Fixed formatting problem.Tue, 25 Jun 2019 10:25:38 +0200, by Sascha L. Teichmann
-
SR import: Allow upload of none-ZIP files and assume they are plain XYZ files.Tue, 25 Jun 2019 10:21:55 +0200, by Sascha L. Teichmann
-
client: search: zoom to bounding box if feature has oneMon, 24 Jun 2019 17:43:54 +0200, by Markus Kottlaender
-
SR import: Accept TXT file for uploads.Mon, 24 Jun 2019 16:28:12 +0200, by Sascha L. Teichmann
-
Fixed typo in gemma schema.Mon, 24 Jun 2019 16:25:17 +0200, by Sascha Wilde
-
Added check trigger to sounding results to ensure they intersect the bn-area.Mon, 24 Jun 2019 16:13:05 +0200, by Sascha Wilde
-
client: import review: load stretches/sections after confirming pending importMon, 24 Jun 2019 15:46:13 +0200, by Markus Kottlaender
-
Merge concave-hull branch into default.Mon, 24 Jun 2019 15:22:39 +0200, by Sascha L. Teichmann
-
Merged default into concave-hull branch. concave-hullMon, 24 Jun 2019 12:54:59 +0200, by Sascha L. Teichmann
-
SR import: Use home-brew concave hull algorithm in multi-beam scan case, too. concave-hullMon, 24 Jun 2019 12:54:25 +0200, by Sascha L. Teichmann
-
Added search for stretches.Mon, 24 Jun 2019 12:47:34 +0200, by Sascha Wilde
-
Search delivers now bbox (geometry) for sections and bottlenecks.Mon, 24 Jun 2019 12:43:30 +0200, by Sascha Wilde
-
Use correct existing function to convert ISRS code to string.Mon, 24 Jun 2019 11:58:08 +0200, by Sascha Wilde
-
Added ISRS code search for rhm.Mon, 24 Jun 2019 11:56:38 +0200, by Sascha Wilde
-
Fixed typo in search functions.Mon, 24 Jun 2019 11:52:07 +0200, by Sascha Wilde
-
Ignore erased gauges in search.Mon, 24 Jun 2019 11:51:31 +0200, by Sascha Wilde
-
Added some optimizer hints to search functions.Mon, 24 Jun 2019 11:49:08 +0200, by Sascha Wilde
-
Moved rhm search to db.Mon, 24 Jun 2019 11:46:20 +0200, by Sascha Wilde
-
Estimated too large triangles as triangles which have an edge which is at least 3.5 times as long as the standard dev of the longest egde per inner triangle. concave-hullMon, 24 Jun 2019 11:39:09 +0200, by Sascha L. Teichmann
-
Allow to search gauges per ISRS code.Mon, 24 Jun 2019 11:22:16 +0200, by Sascha Wilde
-
schema: Added function to detect string representation of ISRS codes.Mon, 24 Jun 2019 11:21:41 +0200, by Sascha Wilde
-
Make isrs_fromText case insensitive.Mon, 24 Jun 2019 11:20:34 +0200, by Sascha Wilde
-
Bumped version for next dev period.Thu, 20 Jun 2019 19:43:25 +0200, by Sascha Wilde
-
Added tag v3 for changeset d4a5d11e23a0Thu, 20 Jun 2019 19:42:41 +0200, by Sascha Wilde
-
client: waterlevel diagrams: make now line label not update its position when zoomingThu, 20 Jun 2019 19:16:26 +0200, by Markus Kottlaender
-
Partially fix waterlevel selection for gauge_measurements(_predictions)Thu, 20 Jun 2019 18:42:52 +0200, by Raimund Renkert
-
client: waterlevel diagrams: fix now lines positioningThu, 20 Jun 2019 18:36:53 +0200, by Markus Kottlaender
-
import: Fixed data initialization for database rows.Thu, 20 Jun 2019 18:15:57 +0200, by Raimund Renkert
-
client: hydrological conditions diagram: handle gauges without reference waterlevelsThu, 20 Jun 2019 18:10:08 +0200, by Markus Kottlaender
-
Password reset: Send redirect to server starting page when reset succeeded.Thu, 20 Jun 2019 18:04:53 +0200, by Sascha L. Teichmann
-
client: gauges map layer: handle gauges without reference waterlevelsThu, 20 Jun 2019 17:09:31 +0200, by Markus Kottlaender
-
client: waterlevel diagram: handle gauges without reference waterlevelsThu, 20 Jun 2019 17:03:38 +0200, by Markus Kottlaender
-
import: Trim whitespaces in ISRS code and improved log messsage.Thu, 20 Jun 2019 15:26:17 +0200, by Raimund Renkert
-
client: available fairway depth diagram: decreased label font-size to avoid overlapping at least a little bit betterThu, 20 Jun 2019 15:09:48 +0200, by Markus Kottlaender
-
client: available fairway depth diagram: made width of bar charts adjust to diagram width to prevent overflowThu, 20 Jun 2019 15:02:39 +0200, by Markus Kottlaender
-
import_soundingresults: parameter 'single-beam:true|false'Thu, 20 Jun 2019 13:47:54 +0200, by Thomas Junk
-
import_soundingresults: send 'beam-type: multi-|single-beam'Thu, 20 Jun 2019 13:06:45 +0200, by Thomas Junk
-
Eat single-beam parameter in form of 'single-beam' mit accepted values of 'true, false, 0, 1, singlebeam, single-beam, multibeam, multi-beam'.Thu, 20 Jun 2019 12:54:35 +0200, by Sascha L. Teichmann
-
import_soundingresult: form parameter for beamtype to booleanThu, 20 Jun 2019 12:44:19 +0200, by Thomas Junk
-
Spelled singlebeam as single-beam and multibeam as multi-beam.Thu, 20 Jun 2019 11:59:36 +0200, by Sascha L. Teichmann
-
client: available fairway depth dialog: improved type selectionThu, 20 Jun 2019 11:49:51 +0200, by Markus Kottlaender
-
import: Use dates_issue parameter in gm imports.Thu, 20 Jun 2019 11:16:14 +0200, by Raimund Renkert
-
context_box: move bottlenecks and importoverview out of keep-alive-zoneThu, 20 Jun 2019 10:27:14 +0200, by Thomas Junk
-
client: remove SVG export from waterlevel diagramThu, 20 Jun 2019 08:34:51 +0200, by Bernhard Reiter
-
MergedWed, 19 Jun 2019 17:01:17 +0200, by Sascha Wilde
-
Handle updates (vs. historized and new versions) separately.Wed, 19 Jun 2019 17:00:08 +0200, by Sascha Wilde
-
client: fairway availability diaglog: set correct type when opened from map popupWed, 19 Jun 2019 16:15:42 +0200, by Markus Kottlaender
-
Don't include calculated area in unchanged bottleneck detection.Wed, 19 Jun 2019 12:34:48 +0200, by Sascha Wilde
-
import_soundingresult: sysadmin sees full list of bottlenecksWed, 19 Jun 2019 11:40:58 +0200, by Thomas Junk
-
client: available fairway depth diagram: show date labels below bar charts like in other diagramWed, 19 Jun 2019 11:34:43 +0200, by Markus Kottlaender
-
import_soundingresult: restrict users to import only data for bottlenecks they are responsible forWed, 19 Jun 2019 11:27:14 +0200, by Thomas Junk
-
client: import configuration: show 'Trigger import' button when editing an import as wellWed, 19 Jun 2019 11:24:30 +0200, by Markus Kottlaender
-
Detect and handle unchanged BN during import.Wed, 19 Jun 2019 11:20:47 +0200, by Sascha Wilde
-
client: import configuration: re-enabled 'Trigger import' buttonWed, 19 Jun 2019 11:18:26 +0200, by Markus Kottlaender
-
client: keep components in contextboxx aliveWed, 19 Jun 2019 11:13:23 +0200, by Markus Kottlaender
-
import_configuration: adapt backend notation 'single-beam'Wed, 19 Jun 2019 08:53:48 +0200, by Thomas Junk
-
client: bottleneck surveys dialog: show only compare survey dates that are not the selected oneTue, 18 Jun 2019 18:23:20 +0200, by Markus Kottlaender
-
client: configuration: load settings beforeEach route but only if not present yetTue, 18 Jun 2019 18:03:23 +0200, by Markus Kottlaender
-
import_soundingresults: bottlenecks grouped by countrycodeTue, 18 Jun 2019 17:44:28 +0200, by Thomas Junk
-
client: waterlevel diagrams: fixed drawing of ref waterlevel linesTue, 18 Jun 2019 17:04:45 +0200, by Markus Kottlaender
-
import_overview: on mount always initialize with latest importsTue, 18 Jun 2019 16:52:02 +0200, by Thomas Junk
-
Fixed SQL in bottleneck/fairway-depth api.Tue, 18 Jun 2019 16:44:05 +0200, by Sascha Wilde
-
client: diagrams: wait (longer) for legend child component to render before rendering diagram (see comments for explanation)Tue, 18 Jun 2019 16:40:04 +0200, by Markus Kottlaender
-
client: diagram legend: set z-index for legend toggle button to prevent it from being overlapped and not clickableTue, 18 Jun 2019 16:23:00 +0200, by Markus Kottlaender
-
client: diagram legend: prevent vertical overflow (when collapsed) from affecting diagram heightTue, 18 Jun 2019 16:17:36 +0200, by Markus Kottlaender
-
client: layers: unset layer config on logoutTue, 18 Jun 2019 14:39:36 +0200, by Markus Kottlaender
-
client: importoverview: refresh on mountTue, 18 Jun 2019 14:15:29 +0200, by Markus Kottlaender
-
client: fairway profile: avoid console error spamming by properly checking propertiesTue, 18 Jun 2019 13:21:41 +0200, by Markus Kottlaender
-
client: diagrams: fixed removal of resize listenerTue, 18 Jun 2019 12:53:05 +0200, by Markus Kottlaender
-
Handle violation of responsibility areas graceful for BN import.Tue, 18 Jun 2019 12:43:01 +0200, by Sascha Wilde
-
client: configuration: changed loading strategyTue, 18 Jun 2019 12:02:18 +0200, by Markus Kottlaender
-
Use infinite validity for bottlenecks with no validity information.Mon, 17 Jun 2019 18:45:48 +0200, by Sascha Wilde
-
client: make layer factory only return new layer config for individual mapsMon, 17 Jun 2019 17:31:35 +0200, by Markus Kottlaender
-
import_logs: client side sorting for countryMon, 17 Jun 2019 17:27:24 +0200, by Thomas Junk
-
import_configuration: enhance schedule with country of userMon, 17 Jun 2019 17:12:00 +0200, by Thomas Junk
-
import_soundingresults: rename depthReference to 'depth-reference'Mon, 17 Jun 2019 17:02:48 +0200, by Thomas Junk
-
import_configuration: search for user and countryMon, 17 Jun 2019 16:24:46 +0200, by Thomas Junk
-
merged configuration into default branchMon, 17 Jun 2019 15:51:57 +0200, by Thomas Junk
-
import_sounding_results: download meta.json fixed configurationMon, 17 Jun 2019 15:24:22 +0200, by Thomas Junk
-
client: make sure config is loaded after loginMon, 17 Jun 2019 12:54:13 +0200, by Markus Kottlaender
-
usermanagement: return an empty list of user countries in case the user is logged out and the object is not present configurationMon, 17 Jun 2019 12:29:20 +0200, by Thomas Junk
-
client: fix redirect bug in login processMon, 17 Jun 2019 12:27:55 +0200, by Markus Kottlaender
-
client: avoid requesting number of pending imports after logging outMon, 17 Jun 2019 11:08:03 +0200, by Markus Kottlaender
-
client: fix rendering of diagram on PDF (Fairwayprofile)Mon, 17 Jun 2019 11:00:21 +0200, by Fadi Abbud
-
Align bottleneck validity at gaugesSat, 15 Jun 2019 14:36:50 +0200, by Tom Gottfried
-
Use database triggers to move referencing objects to new versionsSat, 15 Jun 2019 09:24:28 +0200, by Tom Gottfried
-
SR import: Made error messages symmetrical to multi beam if no matching bottleneck is found for single beam imports.Fri, 14 Jun 2019 17:56:42 +0200, by Sascha L. Teichmann
-
Be more verbose if a SOAP call fails.Fri, 14 Jun 2019 16:21:25 +0200, by Sascha L. Teichmann
-
Added easy to remember and use waterway admin users for all countries.Fri, 14 Jun 2019 13:30:33 +0200, by Sascha Wilde
-
Added handcrafted responsibility areas and matching stretches.Fri, 14 Jun 2019 13:29:40 +0200, by Sascha Wilde
-
Merged single-beam branch into default.Fri, 14 Jun 2019 12:03:47 +0200, by Sascha L. Teichmann
-
Merged default into single-beam branch. single-beamFri, 14 Jun 2019 12:02:58 +0200, by Sascha L. Teichmann
-
Handle th case that a boundary polygon is uploaded along side with the single beam scan. single-beamFri, 14 Jun 2019 11:59:14 +0200, by Sascha L. Teichmann
-
client: changed button color on login screenFri, 14 Jun 2019 11:16:09 +0200, by Markus Kottlaender
-
Ensure sounding results are associated to matching bottleneck versionThu, 13 Jun 2019 19:13:42 +0200, by Tom Gottfried
-
Started with cleaning up the single beam import. single-beamThu, 13 Jun 2019 18:33:54 +0200, by Sascha L. Teichmann
-
Fixed problem with wrong EPSG code. single-beamThu, 13 Jun 2019 17:07:28 +0200, by Sascha L. Teichmann
-
Another attempt to fix the ST_IsValid check contstraint problem ... and also failed. single-beamThu, 13 Jun 2019 16:36:21 +0200, by Sascha L. Teichmann
-
Tried to fix invalid new boundary polygon with ST_MakeValid() ... and failed. single-beamThu, 13 Jun 2019 16:04:46 +0200, by Sascha L. Teichmann
-
Fixed generating of random points. single-beamThu, 13 Jun 2019 13:14:40 +0200, by Sascha L. Teichmann
-
merged configuration branch into defaultThu, 13 Jun 2019 11:20:17 +0200, by Markus Kottlaender
-
Avoid empty validity time rangesWed, 12 Jun 2019 18:26:26 +0200, by Tom Gottfried
-
Fixup accidental change in rev. 02951a62e8c6Wed, 12 Jun 2019 18:21:14 +0200, by Tom Gottfried
-
Generate random points for second mesh. single-beamWed, 12 Jun 2019 17:30:20 +0200, by Sascha L. Teichmann
-
'Historicise' bottlenecks on importWed, 12 Jun 2019 17:11:15 +0200, by Tom Gottfried
-
client: cross profile: display arrow in diagramWed, 12 Jun 2019 17:10:49 +0200, by Markus Kottlaender
-
client: cross profiles: improved style of arrow on the map (added white border to have higher contrast)Wed, 12 Jun 2019 16:37:57 +0200, by Markus Kottlaender
-
merged default into configuration branch configurationWed, 12 Jun 2019 16:12:11 +0200, by Markus Kottlaender
-
client: configuration: support wms services with nested layers configurationWed, 12 Jun 2019 16:10:25 +0200, by Markus Kottlaender
-
Merged default into single-beam branch. single-beamWed, 12 Jun 2019 12:57:14 +0200, by Sascha L. Teichmann
-
Extract the removed triangles from first triangulation, too. Useful to build a artifical DEM for second pass. single-beamWed, 12 Jun 2019 12:56:18 +0200, by Sascha L. Teichmann
-
client: css: adjusted color of cutom checkbox configurationWed, 12 Jun 2019 12:16:52 +0200, by Markus Kottlaender
-
client: configuration: look up wms capabilities and make layers configurable configurationWed, 12 Jun 2019 12:08:50 +0200, by Markus Kottlaender
-
Add forecast and measurement quality parameters to sections and stretchesTue, 11 Jun 2019 20:32:25 +0200, by Tom Gottfried
-
Do not show missing date as Unix epochTue, 11 Jun 2019 20:28:38 +0200, by Tom Gottfried
-
Hash the vertices of the concave hull together. single-beamTue, 11 Jun 2019 18:20:41 +0200, by Sascha L. Teichmann
-
Merged default into single-beam branch. single-beamTue, 11 Jun 2019 14:46:14 +0200, by Sascha L. Teichmann
-
Added missing insert grant to sys_admin.system_config for sys_admins. configurationTue, 11 Jun 2019 12:43:05 +0200, by Sascha L. Teichmann
-
Re-worked the Go part a little bit. configurationTue, 11 Jun 2019 12:07:55 +0200, by Sascha L. Teichmann
-
client: configuration: added info popup when saving settings configurationSun, 09 Jun 2019 12:33:47 +0200, by Markus Kottlaender
-
grant read permission on system_config for waterway_users configurationFri, 07 Jun 2019 14:17:01 +0200, by Markus Kottlaender
-
implemented configuration backend and frontend configurationFri, 07 Jun 2019 12:53:41 +0200, by Markus Kottlaender
-
Allow same values for depth_reference in SR as in gaugesWed, 05 Jun 2019 18:50:54 +0200, by Sascha Wilde
-
client: configuration: prepared fetching morphology classbreaks and ecdis url from backendWed, 05 Jun 2019 16:38:26 +0200, by Markus Kottlaender
-
concave hulls for single beam scans ... WIP. single-beamWed, 05 Jun 2019 16:34:52 +0200, by Sascha L. Teichmann
-
Show gauge data in bottlenecks view regardless of whether gauge is erasedWed, 05 Jun 2019 16:33:57 +0200, by Tom Gottfried
-
Added demo users for HU and RS, import geonames for RS.Wed, 05 Jun 2019 15:52:42 +0200, by Sascha Wilde
-
client: waterlevel: check if there is prediction data before drawing the predictionareaWed, 05 Jun 2019 15:47:30 +0200, by Fadi Abbud
-
client: configuration: prepared fetching data accuracy values from backendWed, 05 Jun 2019 14:57:44 +0200, by Markus Kottlaender
-
client: configuration: data accuracy: corrected criteria for forecastsWed, 05 Jun 2019 14:10:57 +0200, by Markus Kottlaender
-
Added tag v3-uat2 for changeset 4d7b481e1d39Wed, 05 Jun 2019 13:45:29 +0200, by Sascha Wilde
-
client: configuration: morphology: even less flashy delete button styleWed, 05 Jun 2019 13:14:48 +0200, by Markus Kottlaender
-
client: configuration: data accuracy: made headers less flashyWed, 05 Jun 2019 13:01:56 +0200, by Markus Kottlaender
-
client: configuration: morphology: changed delete button color, to be less flashyWed, 05 Jun 2019 12:42:31 +0200, by Markus Kottlaender
-
client: configuration: morphology: added default class breaksWed, 05 Jun 2019 12:38:28 +0200, by Markus Kottlaender
-
client: configuration: morphology: removed select fields for greater/lower thanWed, 05 Jun 2019 12:30:36 +0200, by Markus Kottlaender
-
Removed statistics from elimination of triangles.Wed, 05 Jun 2019 12:15:05 +0200, by Sascha L. Teichmann
-
client: configuration: pdf templates: adjusted paddingWed, 05 Jun 2019 12:11:35 +0200, by Markus Kottlaender
-
client: configuration: fixed translatable strings with parametersWed, 05 Jun 2019 12:09:07 +0200, by Markus Kottlaender
-
client: configuration: prepared morphology classbreaks UIWed, 05 Jun 2019 12:02:23 +0200, by Markus Kottlaender
-
sidebar: move staging notifications to store and update notifications after finishing reviewWed, 05 Jun 2019 11:48:15 +0200, by Thomas Junk
-
Moved triangle elimination to triangulation code.Wed, 05 Jun 2019 11:39:25 +0200, by Sascha L. Teichmann
-
client: configuration: prepared component for map layer configurationWed, 05 Jun 2019 09:38:59 +0200, by Markus Kottlaender
-
client: configuration: data accuracy: made strings translatableWed, 05 Jun 2019 09:29:36 +0200, by Markus Kottlaender
-
client: configuration: colors: reduced fontsize in colorpicker headersWed, 05 Jun 2019 09:13:52 +0200, by Markus Kottlaender
-
SR import: If in single beam mode and no boundary is given eliminate triangles which have at least an edge with is longer than 98% of the overall edge lengths.Tue, 04 Jun 2019 18:37:15 +0200, by Sascha L. Teichmann
-
client: configuration: data accuracy: improved textsTue, 04 Jun 2019 18:11:23 +0200, by Markus Kottlaender
-
client: configuration: data accuracy: improved layout/styleTue, 04 Jun 2019 17:05:39 +0200, by Markus Kottlaender
-
client: configuration: unified styles of different config componentsTue, 04 Jun 2019 16:54:45 +0200, by Markus Kottlaender
-
reverted best_utm() back to geography only version.Tue, 04 Jun 2019 16:50:17 +0200, by Sascha L. Teichmann
-
client: configuration: use btn-sm (like everywhere)Tue, 04 Jun 2019 14:44:02 +0200, by Markus Kottlaender
-
client: configuration: pdf templates: replaced select and button with two buttons, saves two clicksTue, 04 Jun 2019 14:42:12 +0200, by Markus Kottlaender
-
client: configuration: used same color picker for all color settings and adjusted its styleTue, 04 Jun 2019 14:32:55 +0200, by Markus Kottlaender
-
client: configuration: prepared UI for data quality thresholds configurationTue, 04 Jun 2019 14:19:50 +0200, by Markus Kottlaender
-
SR import: Using context.Context aware SQL statements.Tue, 04 Jun 2019 13:19:28 +0200, by Sascha L. Teichmann
-
client: diagram-template: improve diagramlegend for fairwayprofile diagramTue, 04 Jun 2019 12:44:22 +0200, by Fadi Abbud
-
Added a geometry version of best_utm() for convenience.Tue, 04 Jun 2019 12:29:20 +0200, by Sascha L. Teichmann
-
client: systemconfiguration: made container scrollable for more configuration optionsTue, 04 Jun 2019 12:12:30 +0200, by Markus Kottlaender
-
SR import: Prepare the separate code paths for single and multibeam scans.Tue, 04 Jun 2019 12:06:36 +0200, by Sascha L. Teichmann
-
SR import: a complete parameter overwrite now includes single beam flag.Tue, 04 Jun 2019 11:26:05 +0200, by Sascha L. Teichmann
-
SR import: access beam-type parameter supplied by client. TODO: Implement single beam code path.Tue, 04 Jun 2019 11:14:33 +0200, by Sascha L. Teichmann
-
search: replace commata via SQLTue, 04 Jun 2019 09:50:24 +0200, by Thomas Junk
-
Remove duplicate error messageMon, 03 Jun 2019 18:37:12 +0200, by Tom Gottfried
-
GM import: Try three times when timeouts happen on SOAP service. Increase SOAP timeout to 3 minutes.Mon, 03 Jun 2019 18:24:35 +0200, by Sascha L. Teichmann
-
Update example configMon, 03 Jun 2019 18:07:57 +0200, by Tom Gottfried
-
GM import: Be more graceful when accepting measure/issue dates.Mon, 03 Jun 2019 17:55:49 +0200, by Sascha L. Teichmann
-
search: display locationcodeMon, 03 Jun 2019 17:21:18 +0200, by Thomas Junk
-
client: cross profiles: display reference waterlevel and current waterlevel values in waterlevel dropdown and disabled New button as long as no survey is selectedMon, 03 Jun 2019 17:15:37 +0200, by Markus Kottlaender
-
sr-import: sent 'beam-type' alongMon, 03 Jun 2019 17:06:41 +0200, by Thomas Junk
-
client: waterlevel format in diagrams changed from cm to m and localizedMon, 03 Jun 2019 16:58:02 +0200, by Markus Kottlaender
-
search: fix index issueMon, 03 Jun 2019 16:20:35 +0200, by Thomas Junk
-
import_sounding_result: accept txt filesMon, 03 Jun 2019 16:08:34 +0200, by Thomas Junk
-
client: translations: update source strings for translationsMon, 03 Jun 2019 15:47:32 +0200, by Fadi Abbud
-
client: translations: correct some strings marking (AvailableFairwayDepthDialogue)Mon, 03 Jun 2019 15:41:51 +0200, by Fadi Abbud
-
client: cross profiles: support gabs in fairway and improved display in diagram and legendMon, 03 Jun 2019 13:59:41 +0200, by Markus Kottlaender
-
Fixed projection selection to back end for SR import.Mon, 03 Jun 2019 12:22:26 +0200, by Sascha Wilde
-
client: cross profiles: remove unnecessary unit conversionMon, 03 Jun 2019 11:23:44 +0200, by Markus Kottlaender
-
translations: update source strings for translationMon, 03 Jun 2019 10:37:43 +0200, by Fadi Abbud
-
translations: merge translations from weblateMon, 03 Jun 2019 10:19:18 +0200, by Fadi Abbud
-
Introduce hectometer based order for ranges of ISRS location codesFri, 31 May 2019 20:06:27 +0200, by Tom Gottfried
-
client: improve waterlevel diagramFri, 31 May 2019 17:43:39 +0200, by Bernhard Reiter
-
client: improve copyright header for gauge/Waterlevel.vueFri, 31 May 2019 17:33:42 +0200, by Bernhard Reiter
-
client: improve waterlevel diagramFri, 31 May 2019 17:30:59 +0200, by Bernhard Reiter
-
Improve error messageFri, 31 May 2019 17:24:48 +0200, by Tom Gottfried
-
Improve error handling in area generationFri, 31 May 2019 16:58:42 +0200, by Tom Gottfried
-
Use waterway area as basis for section areaFri, 31 May 2019 16:54:09 +0200, by Tom Gottfried
-
client: import review/configuration: unified column names in table (User/Author -> Owner)Fri, 31 May 2019 16:42:43 +0200, by Markus Kottlaender
-
client: import configuration: added missing sortTable mixinFri, 31 May 2019 16:05:12 +0200, by Markus Kottlaender
-
client: import configuration: check username/password only if requiredFri, 31 May 2019 16:02:37 +0200, by Markus Kottlaender
-
client: diagram legend: added paddingFri, 31 May 2019 15:52:17 +0200, by Markus Kottlaender
-
client: fairway profiles: re-added stroke to fairway boxFri, 31 May 2019 15:22:30 +0200, by Markus Kottlaender
-
only write password attribute, when available previousFri, 31 May 2019 14:48:47 +0200, by Thomas Junk
-
client: fairway profile: close compare view with ESC keyFri, 31 May 2019 14:32:24 +0200, by Markus Kottlaender
-
refactor password persistence for import configurations.Fri, 31 May 2019 14:29:21 +0200, by Thomas Junk
-
Only erase gauges that have been requested from ERDMSFri, 31 May 2019 14:16:48 +0200, by Tom Gottfried
-
import_review: sections&stretches accept old and new format in DBFri, 31 May 2019 13:59:54 +0200, by Thomas Junk
-
import_configuration: if password was persisted it should be repersisted again, if missing in frontendFri, 31 May 2019 13:31:44 +0200, by Thomas Junk
-
client: data availability/accuracy: inject mapId into layer/styles factory to fix display issue with two mapsFri, 31 May 2019 12:45:30 +0200, by Markus Kottlaender
-
client: map layers: share same vector source object for layers that use the same geoserver view (bottlenecks_geoserver)Fri, 31 May 2019 12:20:08 +0200, by Markus Kottlaender
-
sent password when explicitely setFri, 31 May 2019 11:19:38 +0200, by Thomas Junk
-
sent password when explicitely setFri, 31 May 2019 11:16:24 +0200, by Thomas Junk
-
client: diagram-template: improve values of template elementsFri, 31 May 2019 11:08:27 +0200, by Fadi Abbud
-
merge with import_reviewFri, 31 May 2019 09:35:52 +0200, by Thomas Junk
-
merge with branch passwordFri, 31 May 2019 09:34:31 +0200, by Thomas Junk
-
merged waterlevel-in-crossprofile branch into defaultThu, 30 May 2019 10:45:20 +0200, by Markus Kottlaender
-
merged default into waterlevel-in-crossprofile branch waterlevel-in-crossprofileThu, 30 May 2019 10:37:22 +0200, by Markus Kottlaender
-
Prevent non-erased gauge version to have empty validity rangeWed, 29 May 2019 18:41:35 +0200, by Tom Gottfried
-
client: fairway profiles: improved legend waterlevel-in-crossprofileWed, 29 May 2019 18:20:53 +0200, by Markus Kottlaender
-
Improve error messages if no matching gauge version foundWed, 29 May 2019 18:14:20 +0200, by Tom Gottfried
-
merged default into waterlevel-in-crossprofile branch waterlevel-in-crossprofileWed, 29 May 2019 18:05:11 +0200, by Markus Kottlaender
-
client: fairway profiles: added waterlevel to title and used title as pdf filename waterlevel-in-crossprofileWed, 29 May 2019 18:04:07 +0200, by Markus Kottlaender
-
Improve warning messageWed, 29 May 2019 16:56:56 +0200, by Tom Gottfried
-
Improve validation of gauge temporal validityWed, 29 May 2019 16:43:26 +0200, by Tom Gottfried
-
Ignore zero length and whitespace-only valuesWed, 29 May 2019 16:00:28 +0200, by Tom Gottfried
-
client: fairway profiles: implemented selection between depth reference waterlevel and current waterlevel waterlevel-in-crossprofileWed, 29 May 2019 15:56:14 +0200, by Markus Kottlaender
-
client: fairway profiles: fixed waterlevel axis domain waterlevel-in-crossprofileWed, 29 May 2019 13:34:59 +0200, by Markus Kottlaender
-
stretch_import: provide full information for summary import_reviewWed, 29 May 2019 12:30:04 +0200, by Thomas Junk
-
client: fairway profiles: removed strokes for sharper edges waterlevel-in-crossprofileWed, 29 May 2019 12:19:46 +0200, by Markus Kottlaender
-
stretches/sections: availability. fixed typo in 'from' parameter parsing.Wed, 29 May 2019 12:04:19 +0200, by Sascha L. Teichmann
-
ZP for sounding result imports: Use precise name of the depth reference system.Wed, 29 May 2019 11:07:27 +0200, by Sascha L. Teichmann
-
merged default into waterlevel-in-crossprofile branch waterlevel-in-crossprofileWed, 29 May 2019 10:44:14 +0200, by Markus Kottlaender
-
client: data accuracy layer: show only diagrams for layers that are activeWed, 29 May 2019 10:37:01 +0200, by Markus Kottlaender
-
import: fix for passwordleakage. No passwords are received/sent if configuration is edited. passwordWed, 29 May 2019 09:56:42 +0200, by Thomas Junk
-
client: fairway profiles: added second y-axis (WIP) waterlevel-in-crossprofileTue, 28 May 2019 19:22:42 +0200, by Markus Kottlaender
-
client: fairway profiles: removed more code waterlevel-in-crossprofileTue, 28 May 2019 18:40:02 +0200, by Markus Kottlaender
-
client: fairway profiles: removed some old code waterlevel-in-crossprofileTue, 28 May 2019 18:27:21 +0200, by Markus Kottlaender
-
removed waterlevel property from cross profile endpoint waterlevel-in-crossprofileTue, 28 May 2019 17:14:52 +0200, by Markus Kottlaender
-
import_configuration_overview: user country column v3-uat2Tue, 28 May 2019 17:12:02 +0200, by Thomas Junk
-
client: fix User manual filenameTue, 28 May 2019 16:03:07 +0200, by Fadi Abbud
-
import_overview: country for sys_admin = globalTue, 28 May 2019 15:51:33 +0200, by Thomas Junk
-
client: spuc12: implemented diagram for reference gauge of bottlenecksTue, 28 May 2019 14:52:57 +0200, by Markus Kottlaender
-
import_overview: added country columnTue, 28 May 2019 13:47:18 +0200, by Thomas Junk
-
client: identify: remove unwanted attributes from bottlenecks and gaugesTue, 28 May 2019 12:44:13 +0200, by Markus Kottlaender
-
AGM/SR import. Limit logging of warnings to 100.Tue, 28 May 2019 12:09:11 +0200, by Sascha L. Teichmann
-
client: spuc12: added commentsTue, 28 May 2019 11:49:40 +0200, by Markus Kottlaender
-
AGM import: Don't pile up defer calls for every line in CSV file.Tue, 28 May 2019 11:33:57 +0200, by Sascha L. Teichmann
-
client: spuc12: implemented nash sutcliffe for forcast vs reality accuracy indicatorTue, 28 May 2019 11:28:38 +0200, by Markus Kottlaender
-
diagram mixin: prevent null errorsTue, 28 May 2019 11:25:34 +0200, by Thomas Junk
-
afd cosmeticsTue, 28 May 2019 11:16:53 +0200, by Thomas Junk
-
make the linter happierTue, 28 May 2019 10:09:21 +0200, by Thomas Junk
-
Set threshold for green gauge data availability to 85%.Mon, 27 May 2019 18:45:20 +0200, by Sascha Wilde
-
Made sections visualization less bulky.Mon, 27 May 2019 18:34:18 +0200, by Sascha Wilde
-
merged zpg-ldc into default branch.Mon, 27 May 2019 17:33:57 +0200, by Sascha L. Teichmann
-
client: diagram-template: improve diagramlegend element (AvailableFairwayDepth)Mon, 27 May 2019 17:27:39 +0200, by Fadi Abbud
-
soundingresult_import: added ZPG only if not available zpg-ldcMon, 27 May 2019 17:17:47 +0200, by Thomas Junk
-
soundingresult_import: added ZPG as available reference zpg-ldcMon, 27 May 2019 17:04:03 +0200, by Thomas Junk
-
fairwayavailability: omit switch statement and streamline endpointselectionMon, 27 May 2019 16:59:39 +0200, by Thomas Junk
-
client: diagram-template: improve diagramlegend element (AvailableFairwayDepthLNWL)Mon, 27 May 2019 16:38:36 +0200, by Fadi Abbud
-
Generalized transformation of vertices during sounding result import a bit. zpg-ldcMon, 27 May 2019 16:37:19 +0200, by Sascha L. Teichmann
-
fairwayavailability: refactor constantsMon, 27 May 2019 16:33:30 +0200, by Thomas Junk
-
Add 'translation' and bottleneck attributes for measurement availabilityMon, 27 May 2019 16:28:22 +0200, by Tom Gottfried
-
afdLNWL: increase debounce to prevent update errorsMon, 27 May 2019 16:20:35 +0200, by Thomas Junk
-
afdLNWL: robust legend nameMon, 27 May 2019 16:02:27 +0200, by Thomas Junk
-
mergeMon, 27 May 2019 15:55:59 +0200, by Thomas Junk
-
afd: robust legend nameMon, 27 May 2019 15:54:35 +0200, by Thomas Junk
-
Colorize gauge symbol based on availability of measurementsMon, 27 May 2019 15:45:55 +0200, by Tom Gottfried
-
Translate sounding results Z values import to LDC if ZPG was found as depth reference system. zpg-ldcMon, 27 May 2019 15:17:38 +0200, by Sascha L. Teichmann
-
mixin: assume when element not in DOM width and height are 0Mon, 27 May 2019 15:08:44 +0200, by Thomas Junk
-
client: fixed feature type check for production buildMon, 27 May 2019 13:58:19 +0200, by Markus Kottlaender
-
afd: omit legend generation from CSV. Legend is generated from known inputsMon, 27 May 2019 13:10:05 +0200, by Thomas Junk
-
legendMon, 27 May 2019 12:20:23 +0200, by Thomas Junk
-
legendMon, 27 May 2019 12:16:45 +0200, by Thomas Junk
-
fairway availabilty: Fixed off-by-one array access when filling LDC classification into result rows.Mon, 27 May 2019 12:15:35 +0200, by Sascha L. Teichmann
-
client: Use classifications for bottleneck diagrams on map and extracted classification algosMon, 27 May 2019 12:09:13 +0200, by Raimund Renkert
-
legendMon, 27 May 2019 12:03:07 +0200, by Thomas Junk
-
fairway availabilty: prefill result mit zero values if there is no data.Mon, 27 May 2019 11:42:14 +0200, by Sascha L. Teichmann
-
Added latest sounding result date to bottlenecks_geoserver view.Mon, 27 May 2019 11:22:12 +0200, by Sascha Wilde
-
fairway availibility: Fixed time interval for line.Mon, 27 May 2019 11:21:11 +0200, by Sascha L. Teichmann
-
Simplified code paths of fairway availibilty/depth for streches/sections.Mon, 27 May 2019 11:18:05 +0200, by Sascha L. Teichmann
-
client: unify the buttons style for diagram legendMon, 27 May 2019 10:49:50 +0200, by Fadi Abbud
-
afd(LNWL): additional queryparams (widthbreaks, depthbreaks) for sections and stretches implementedMon, 27 May 2019 10:38:42 +0200, by Thomas Junk
-
afd. offset correction for ldcMon, 27 May 2019 10:23:32 +0200, by Thomas Junk
-
afdLNWL: basical usage of classbreaksMon, 27 May 2019 09:57:54 +0200, by Thomas Junk
-
afd: offset left instead right. except LDC all bars now have the same width.Mon, 27 May 2019 09:33:05 +0200, by Thomas Junk
-
client: spuc05: implemented new data structure (CSV) and added support for multiple chartsSun, 26 May 2019 16:33:02 +0200, by Markus Kottlaender
-
Don't dereference pointers before checking them not to be nil.Fri, 24 May 2019 22:01:32 +0200, by Sascha L. Teichmann
-
Minor change to new warning for consistency.Fri, 24 May 2019 18:06:58 +0200, by Sascha Wilde
-
Validate temporal validity of gauges on importFri, 24 May 2019 17:45:17 +0200, by Tom Gottfried
-
client: spuc05: implemented new data format (csv) for diagrams on mapFri, 24 May 2019 15:32:47 +0200, by Markus Kottlaender
-
Add reference gauge forecast accuracy to bottlenecks viewFri, 24 May 2019 14:24:24 +0200, by Tom Gottfried
-
Slightly improved generated CSV headers, also used as legend by client.Fri, 24 May 2019 13:46:56 +0200, by Sascha Wilde
-
Avoid full sequential scan on measurements for every queryFri, 24 May 2019 13:35:26 +0200, by Tom Gottfried
-
diagram fixFri, 24 May 2019 13:34:14 +0200, by Thomas Junk
-
fairway depth/availability: bring unified CVS to streches and sections, too.Fri, 24 May 2019 13:09:08 +0200, by Sascha L. Teichmann
-
afdFri, 24 May 2019 13:07:02 +0200, by Thomas Junk
-
afdLNWL: CSV-ExportFri, 24 May 2019 12:51:12 +0200, by Thomas Junk
-
afd: new format adaptedFri, 24 May 2019 12:43:07 +0200, by Thomas Junk
-
client: data accuracy: use single color for bottlenecks in diagram.Fri, 24 May 2019 12:36:54 +0200, by Raimund Renkert
-
Merged fairway-avail-csv into default branch.Fri, 24 May 2019 12:15:39 +0200, by Sascha L. Teichmann
-
Merged default into fairway-avail-csv branch fairway-avail-csvFri, 24 May 2019 12:14:57 +0200, by Sascha L. Teichmann
-
Write fairway-depth as CSV, too. fairway-avail-csvFri, 24 May 2019 12:13:55 +0200, by Sascha L. Teichmann
-
client: data accuracy: Add diagram for sections.Fri, 24 May 2019 12:05:35 +0200, by Raimund Renkert
-
Exchange comparison and accuracy trianglesFri, 24 May 2019 11:46:07 +0200, by Tom Gottfried
-
Adapt color scheme for waterlevel prediction accuracyFri, 24 May 2019 11:37:24 +0200, by Tom Gottfried
-
afd: improve legend coloringFri, 24 May 2019 11:31:43 +0200, by Thomas Junk
-
client: diagram-template: fix the size of renderd Diagram in case two diagrams are shown on the screenFri, 24 May 2019 11:20:54 +0200, by Fadi Abbud
-
Prepared to write the fairway availibilty as CSV, too. WIP. fairway-avail-csvFri, 24 May 2019 11:20:15 +0200, by Sascha L. Teichmann
-
New parsing of incoming afdcsvFri, 24 May 2019 11:15:58 +0200, by Thomas Junk
-
afd: csv downloadFri, 24 May 2019 10:21:06 +0200, by Thomas Junk
-
client: lintingFri, 24 May 2019 10:01:40 +0200, by Markus Kottlaender
-
client: Added legend icon for data accuracy layer.Fri, 24 May 2019 09:57:31 +0200, by Raimund Renkert
-
client: data accuracy: Show diagrams for gauges, bottlenecks and stretches on map.Fri, 24 May 2019 09:51:04 +0200, by Raimund Renkert
-
client: spuc05: use real data for diagrams on mapFri, 24 May 2019 09:40:43 +0200, by Markus Kottlaender
-
Add forecast accuracy within next day to gauges viewThu, 23 May 2019 18:36:26 +0200, by Tom Gottfried
-
Add forecast accuracy to gauges viewThu, 23 May 2019 17:29:34 +0200, by Tom Gottfried
-
fairway availibilty: Implemented for streches and sections.Thu, 23 May 2019 17:28:14 +0200, by Sascha L. Teichmann
-
client: pdf-template:(minor) add missing parameterThu, 23 May 2019 16:49:28 +0200, by Fadi Abbud
-
fairway availabilty: A more constistent result format.Thu, 23 May 2019 16:40:15 +0200, by Sascha L. Teichmann
-
client: import config: fixed toggle buttonsThu, 23 May 2019 16:34:41 +0200, by Markus Kottlaender
-
fairway availibilty: Changed result document to be more precise.Thu, 23 May 2019 16:25:30 +0200, by Sascha L. Teichmann
-
client: toolbar/dialogs: unified toolbar tooltips and dialog titlesThu, 23 May 2019 15:58:12 +0200, by Markus Kottlaender
-
fairway availabilty: removed level from class breaks.Thu, 23 May 2019 15:49:59 +0200, by Sascha L. Teichmann
-
Make revisiting time of a bottleneck optionalThu, 23 May 2019 15:33:56 +0200, by Tom Gottfried
-
Merged.Thu, 23 May 2019 15:33:23 +0200, by Sascha L. Teichmann
-
Merged.Thu, 23 May 2019 15:33:02 +0200, by Sascha L. Teichmann
-
fairway availability: Normalize results to look like as we only have one bottleneck.Thu, 23 May 2019 15:32:38 +0200, by Sascha L. Teichmann
-
afdLNWL: more robust drawingThu, 23 May 2019 15:32:48 +0200, by Thomas Junk
-
MergedThu, 23 May 2019 15:32:14 +0200, by Sascha Wilde
-
Reordered import types in "new import" menu.Thu, 23 May 2019 15:31:22 +0200, by Sascha Wilde
-
client: import review: added button to go back to latest dateThu, 23 May 2019 15:31:05 +0200, by Markus Kottlaender
-
mergeThu, 23 May 2019 15:30:25 +0200, by Thomas Junk
-
console.log removedThu, 23 May 2019 15:30:03 +0200, by Thomas Junk
-
Merged.Thu, 23 May 2019 15:25:46 +0200, by Sascha L. Teichmann
-
fairway availibility: Reduce defaults to 230 and 250 as class breaks.Thu, 23 May 2019 15:25:24 +0200, by Sascha L. Teichmann
-
console.log removedThu, 23 May 2019 15:25:17 +0200, by Thomas Junk
-
afd: tooltipsThu, 23 May 2019 15:24:28 +0200, by Thomas Junk
-
client: import review: refresh map layers after accepting/declining importsThu, 23 May 2019 14:47:33 +0200, by Markus Kottlaender
-
client: pdf-template: fix display of user and move property to mixins.jsThu, 23 May 2019 13:39:04 +0200, by Fadi Abbud
-
afd: breaks for bottlenecksThu, 23 May 2019 13:37:35 +0200, by Thomas Junk
-
client: pdf-template:(minor) add missed parameter for image elementThu, 23 May 2019 13:09:49 +0200, by Fadi Abbud
-
available fairway depth: Implemented backend for sections and stretches.Thu, 23 May 2019 12:53:19 +0200, by Sascha L. Teichmann
-
client: waterlevel diagrams: disabled export buttons when no data is availableThu, 23 May 2019 12:48:55 +0200, by Markus Kottlaender
-
client: waterlevel diagrams: implemented csv exportThu, 23 May 2019 12:42:26 +0200, by Markus Kottlaender
-
Fix adaptation of gauge temporal validityThu, 23 May 2019 12:27:14 +0200, by Tom Gottfried
-
MergedThu, 23 May 2019 11:34:34 +0200, by Sascha Wilde
-
Reordered toll bar and collapse to info+layers only.Thu, 23 May 2019 11:32:30 +0200, by Sascha Wilde
-
client: user manual: fix console error and hide it when url is not cofiguredThu, 23 May 2019 11:32:23 +0200, by Fadi Abbud
-
removed console.logThu, 23 May 2019 10:57:46 +0200, by Thomas Junk
-
afd: breadth->widthThu, 23 May 2019 10:55:57 +0200, by Thomas Junk
-
client: pdf-template: set font style for the text elementThu, 23 May 2019 10:40:14 +0200, by Fadi Abbud
-
client: change user manual locationThu, 23 May 2019 09:07:09 +0200, by Fadi Abbud
-
Added preliminary responsibility area for RS.Wed, 22 May 2019 19:12:08 +0200, by Sascha Wilde
-
Cosmetics: Forgot a newline in logging.Wed, 22 May 2019 18:31:42 +0200, by Sascha L. Teichmann